Metering Station Enclosures

01 / 08

A metering station

A shelter over the meter runs, built on the same base as the skid. The runs and instruments are the client’s.

Scroll to see how it is built · drag to turn it round

02 / 08

One base for both

The skid base carries the meter runs and the shelter, so the station ships and sets as one.

How is it possible at Allmarc?

Robotic H-beam cutting and bevelling cellBeams up to 1,000 x 500 mm

Used here for: One base for both

• Beams up to 1,000 x 500 mm
• 12 m long, 50 mm thick
• Hypertherm XPR 300

All our machinery

03 / 08

Frame

Columns and rafters bolted to the base.

How is it possible at Allmarc?

Kotec newRun10DX CNC beam drilling lineH-beams up to 1,000 x 500 mm

Used here for: Frame

Heavy profiles that need precise holes, where plasma cannot do the job: the lower structure and panel borders of a ground flare, and every bolted PEB and multi-storey frame.

• H-beams up to 1,000 x 500 mm
• Drills 3 faces in one pass
• Channels, angles and box sections

All our machinery

04 / 08

Roof and cladding

Purlins, roof sheet and cladding; shown open on two sides here.

05 / 08

Louvres and doors

Ventilation louvres and a double door, folded and framed in our sheet-metal facility.

How is it possible at Allmarc?

Deratech 8 m tandem press brake8 m bending length

Used here for: Louvres and doors

• 8 m bending length
• Tandem technology

All our machinery

Trumpf TruPunch 1000 CNC punchingCNC punching

Used here for: Louvres and doors

• CNC punching
• Among the first in Gujarat, 2018

All our machinery

06 / 08

Monorail

A monorail and hoist over the runs for maintenance.

07 / 08

Meter runs

The client’s meters, valves and transmitters.

08 / 08

A kit of parts

Base, frame, cladding and monorail: every member numbered, match-marked and packed in erection sequence.