
- Home
- Custom Fabrication
- Derrick & Flare Structures
Derrick and flare structures
Flare support derricks, flare stacks and derrick substructures, fabricated in India for refineries and gas plants.
Derrick & Flare Structures, made in India.
Tall flares are held up by a derrick, a lattice tower that carries the flare riser and lets it be lowered for maintenance. Derrick legs, bracing and platforms are fabricated, drilled and trial-fitted so the tower goes up quickly on site.
Allmarc fabricates to the client’s drawing at our 4 plants in Kanbha, Ahmedabad, with cutting, forming, welding, machining, blasting and painting under one roof.
- Flare support derricks
- Elevated flare stacks and risers
- Derrick substructures
- Platforms and ladders
- Bolted lattice bracing
We delivered a flare stack with its liquid seal drum, and a flare riser with liquid seal.
The machines it runs on.
- H-beams up to 1,000 x 500 mm
- Drills 3 faces in one pass
- Beams up to 1,000 x 500 mm
- 12 m long, 50 mm thick
- 40 m, state of the art
- No programming: weld lines taken from the 3D model
- Rolls plate up to 40 mm
Industries and related work.
Enclosed ground flare combustion chambers, wind fences and burner structures for refineries and LNG plants.
Liquid seal drumsAlso in this group: Skid Mount Frames, Pipe Spools with Flanges, Wellhead Platforms.
Derrick & Flare Structures, answered.
What do you fabricate for flare systems?
Flare stacks and risers, support derricks, enclosed ground flares, knock-out drums and liquid seal drums.
Do you make the flare riser as well as the derrick?
Yes. We have delivered a 35 m flare riser with liquid seal, flare tip, piping and access for Koch Engineering, USA, our first pressure-part project.
How do you drill derrick legs and bracing?
Legs and bracing are drilled on our Kotec CNC beam line and cut on our robotic beam cutting cell, so the lattice bolts up without reaming.
Is the derrick trial-fitted in the works?
Yes. Derrick sections are trial-fitted so the tower goes up quickly on site.
Do you write weld procedures for pressure parts?
Yes. We generated the WPS for our flare riser and liquid seal project and qualify procedures for each job.
How are derrick sections shipped?
Sections are bundled by level, bolts are bagged and labelled by joint, and every member is marked to the erection drawing. We ship by sea to the USA and anywhere else.
What finish do flare structures get?
Blasting to Sa 2.5 and painting in our booths, or hot-dip galvanizing through our partners, as the project specifies.
Do you also make knock-out and liquid seal drums?
Yes. We fabricate knock-out drums and liquid seal drums for flare systems.
Need derrick & flare structures? Send the drawing.
Tell us the quantity, material and delivery; an engineer will reply with how we would make it.