
- Home
- Custom Fabrication
- Shredders
Shredder fabrication
Shredder housings, hoppers, bins and discharge chutes for waste, recycling and scrap processing, with machined bearing seats.
Shredders, made in India.
Industrial shredders tear waste, scrap and tyres apart between heavy rotors. Their housings must be stiff, the bearing seats accurate and the hoppers and chutes built to take abrasion.
Allmarc fabricates to the client’s drawing at our 4 plants in Kanbha, Ahmedabad, with cutting, forming, welding, machining, blasting and painting under one roof.
- Shredder housings and side frames
- Feed hoppers and bins
- Discharge chutes
- Cyclones and circular ducts
- Machined bearing seats
- Base frames and guards
We fabricate shredder machine parts, hoppers, bins, chutes, circular ducts and cyclones for Wendt Corporation (USA), delivered to Australia.
The machines it runs on.
- 20 kW
- 12 x 3 m bed
- 600 T
- 6 m long
- 40 m, state of the art
- No programming: weld lines taken from the 3D model
- Mills beam and column ends square for bolted splices
Industries and related work.
Manufacturing & machine buildingConstruction & mining equipment makers
Screw augers, conveyors and troughs for sludge, screenings and grit in waste water treatment plants.
Machine frames & weldments Large Diameter Welded Circular StructuresRolled and welded rings, shells, ducts and domes several metres across, made accurate enough to bolt up first time.
Also in this group: Chemical Process Tanks, Dry & Wet Storage Silos, Beam Guiders, Chimney Stacks, Steam Ducts.
Shredders, answered.
Has Allmarc made shredder parts for export?
Yes. We fabricate shredder machine parts, hoppers, bins, chutes, circular ducts and cyclones for Wendt Corporation (USA), delivered to Australia.
Do you machine shredder housings?
Yes. Bearing seats and mating faces are machined after welding.
Which shredder parts do you make?
Housings and side frames, feed hoppers and bins, discharge chutes, cyclones, circular ducts, base frames and guards, with machined bearing seats.
How do you make housings stiff enough?
Thick plate is laser cut and formed on our 600 T press brake, welded on our Cloos robotic line and then machined, so the housing holds the rotor true under load.
Do you work to the OEM’s drawings?
Yes. We work build-to-print for Wendt Corporation (USA), making shredder parts, hoppers, bins, chutes, cyclones and circular ducts to their drawings.
Which quality standards do you work to?
ISO 9001:2015 for quality, ISO 45001:2018 for safety, and EN 1090-1 and EN ISO 3834-3 for welding.
How are shredder parts packed?
Machined faces are protected and covered, housings are bolted to skids, and smaller parts are wrapped and strapped on pallets for export.
Where have you shipped shredder parts?
Our shredder parts for Wendt Corporation are delivered to Australia by sea. We ship to recycling plants and OEMs in any country.
Need shredders? Send the drawing.
Tell us the quantity, material and delivery; an engineer will reply with how we would make it.