
- Home
- Custom Fabrication
- Mills & Mill Structures
Mill shells and mill structures
Rolled mill shells, rotary drums, base frames and mill building steel for mineral processing and cement grinding.
Mills & Mill Structures, made in India.
Grinding mills and rotary drums are large rolled steel cylinders turning on heavy bases. Around them sit the feed chutes, discharge structures, platforms and the mill building itself. We roll, weld and machine the shells and fabricate the steel structure around them.
Allmarc fabricates to the client’s drawing at our 4 plants in Kanbha, Ahmedabad, with cutting, forming, welding, machining, blasting and painting under one roof.
- Rolled shells and rotary drums
- Flanged shell sections
- Base frames and sole plates
- Feed and discharge chutes
- Mill building and platform steel
- Liners and wear parts to drawing
For the North Mara gold mine in Tanzania we fabricated the crusher structure, screening building, rotary drum, ducting and structural steel building.
The machines it runs on.
- Rolls plate up to 40 mm
- Hypertherm XPR 460, first in India
- 5 oxy-fuel torches
- 40 m, state of the art
- No programming: weld lines taken from the 3D model
- Mills beam and column ends square for bolted splices
Industries and related work.
Mining & material handlingCement & heavy industry
Rolled and welded rings, shells, ducts and domes several metres across, made accurate enough to bolt up first time.
Bucket ElevatorsBucket elevator casings, head and boot sections, and support structures, fabricated for cement, mining and bulk handling plants.
Chutes, hoppers & binsAlso in this group: Apron Feeders, Stacker & Reclaimer Parts, Rock Breaking Equipment Booms & Telescopes, Conveyor Gantries, Maintenance Galleries, Chutes & Hoppers, Mineral Processing & Crushing Screens.
Mills & Mill Structures, answered.
Has Allmarc fabricated a rotary drum before?
Yes, for the North Mara gold mine in Tanzania, along with the crusher structure, screening building and ducting.
Can you machine mill flanges after welding?
Yes. Flanges and seats are machined after welding so sections bolt together true.
How thick a shell can you roll?
Our three-roll pinch and pyramid plate rolls take plate up to 40 mm, so mill shells and drums are rolled in house, not bought in.
How do you keep a rolled drum round and straight?
Shells are rolled in segments, checked for diameter and roundness, and joined in fixtures. Flanges are machined after welding so they sit true to the axis.
Can you fabricate the mill building as well?
Yes. Base frames, sole plates, feed and discharge chutes, platforms and the mill building steel can all come from us, as they did for the North Mara gold mine in Tanzania.
Are welds on rotating shells tested?
Welding follows qualified procedures under EN ISO 3834-3 and EN 1090-1, and every stage is inspected and documented under ISO 9001:2015. Testing beyond that is done to the client’s inspection plan.
How is a large drum shipped?
Drums are braced inside so they stay round, sat on cradles and secured for sea freight. Machined faces are protected and covered.
Have you shipped mill steel to Africa?
Yes. The crusher structure, screening building, rotary drum, ducting and building steel for the North Mara gold mine went by sea to Tanzania. We ship to mines in any country.
Need mills & mill structures? Send the drawing.
Tell us the quantity, material and delivery; an engineer will reply with how we would make it.